hybrid Cryorig company produces maintenance free liquid cooling system series A, intended for cooling the processors. They were first shown in June at Computex 2015.
This fan in blowing the components close to the processor. This provides a reduction in the temperature of these components by 20 percent, as compared to their temperature in the conventional liquid cooling systems. Fan removable, and can be installed by any party to the blowing or blow-out. Its rotation speed is regulated by PWM in the range 1500-3000 r / min, with a maximum noise level of 27 dBA. The fan creates airflow to 42.5 m³ / h.
Models A40 and A40 Ultimate equipped with aluminum radiators size of 240 millimeters, only the first model has a thickness of 27.5 millimeters, while the second - 38.5 millimeters. For air cooling radiators in both cases corresponds a pair of 120-millimeter fans QF120 Performance. They can be rotated at a speed of 600 to 2200 r / min, thus providing an air stream to 141 m³ / h, with a maximum noise level of 37 dBA.
Cryorig A80 heatsink size is 280 mm, and a thickness of 27.5 millimeters. To blow it uses a pair of 140-millimeter fans QF140 Performance. They rotate at a speed of 600-1850 r / min, creating an air flow to 217.5 m³ / h. The noise level may reach 38 dBA.
Above the water-block installed pump Asetek fifth generation, which has been completely redesigned and optimized. This allows to achieve a lower temperature, while maintaining the same level of noise.
In Japan, sales of new hybrid fluid coolers began today, as in other markets, they will appear in the second half of November. Cost A40, A40 Ultimate and A80 will be 100, 110 and $ 120, respectively. Related Products :
|