- GeForce GTX 1080 Ti at 2720-10000 MHz updates the record GPUPI 32B - Do you think that society will becaome better or wrose from increased automation and AI - Prepared for sale boards on Intel X299 are not suitable for overclocking Skylake-X - First look at the new Nokia button phone -

	xtreview is your : Video card - cpu - memory - Hard drive - power supply unit source

POSTER: computer news   ||   GEFORCE GTX 1080 TI AT 2720-10000 MHZ UPDATES THE RECORD GPUPI 32B	DATE:2017-06-29
The Greek enthusiast OGS still managed to update the GPUPI 32B record for single video cards by calculating 25.655 seconds in 10 minutes.  By the way, this is the first result in the rating, which does not exceed 11 minutes. Video cards  Pascal generation of GALAX / KFA2 brand have long proved their ability to accelerate under liquid nitrogen to 2.7-2.8 GHz frequencies on the graphics processor, so a copy of the Greek, which was to the hands of the Greek, quietly took the boundary of 2720/10000 MHz. The central processor Core i7-7700K at the same time was satisfied with the air cooling system, as the author claims, but this did not prevent it from taking the 5.0 GHz boundary with the activity of all four cores and Hyper-Threading. Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 49118 Rating: 10.0/10 (9 votes cast) GeForce GTX 1080 Ti at 2720-10000 MHz updates the record GPUPI 32B	Add Comment ( 1 ) GEFORCE GTX 1080 TI AT 2720-10000 MHZ UPDATES THE RECORD GPUPI 32B

POSTER: computer news   ||   DO YOU THINK THAT SOCIETY WILL BECAOME BETTER OR WROSE FROM INCREASED AUTOMATION AND AI	DATE:2017-06-29
ARM Holding decided to finance a sociological survey on the attitude of residents of different countries to the prospect of widespread distribution of robots and artificial intelligence technologies.  The total number of respondents reached 4,000 people, and the geography extended from the United States and Great Britain to China, Japan, Taiwan and South Korea.  As it turned out, 30% of respondents consider job cuts to be the most important danger of the "robotic revolution", calling the sphere of logistics and transport services the most vulnerable to technical progress.  In addition, survey participants believe that robots will quickly displace bank employees and conveyor workers, but farmers, cooks and firefighters may not be afraid of such a substitution. 61% of respondents believe that the distribution of robots will have a positive impact on society.  Another 17% are convinced that nothing will change, and only 22% are pessimistic.  37% believe that medicine and science will benefit from the introduction of artificial intelligence, 29% see robots as executors of the most difficult and dangerous work for a person.  Almost a fifth of respondents believe that robots will reduce the cost of goods and services.  11% of the interviewed people are convinced of the reduction in the frequency of mistakes and accidents caused by a person.  Only five percent of people believe that with the spread of robots they will have more free time. Now you can talk about pessimists.  A fifth of respondents are concerned about the need to trust human lives for robots.  About the same number of people are concerned about the possibility of stealing sensitive information.  Twelve percent of respondents believe that people will feel less in demand, they will have nothing to do.  Eleven percent of respondents are afraid that cars will become too independent in decision-making, and nine percent believe that people will be more willing to build social relationships with robots, rather than with their own kind. Almost half of the survey participants are ready to trust the "artificial doctor", and 55% of people trust "robocar" now.  In ten years 70% of respondents would not object to a trip in an automatic vehicle.  Perhaps, the problem of distrust between people and robots is somewhat exaggerated, judging from the results of this poll. Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 49117 Rating: 10.0/10 (6 votes cast) Do you think that society will becaome better or wrose from increased automation and AI	Add Comment ( 1 ) DO YOU THINK THAT SOCIETY WILL BECAOME BETTER OR WROSE FROM INCREASED AUTOMATION AND AI

POSTER: computer news   ||    PREPARED FOR SALE BOARDS ON INTEL X299 ARE NOT SUITABLE FOR OVERCLOCKING SKYLAKE-X	DATE:2017-06-29
The well-known overclocker Der8auer (Roman Khartung ) has faced a problem of poor quality of motherboard on the Intel X299 chipset.  Motherboards  Manufacturers  neglected to design VRM-circuits for processors and  solutions for removing heat from them. In the process of selecting individual processor instances, the enthusiast found that the VRM of all available motherboards on the Intel X299 quickly overheat even on relatively small loads .  So, one of the models of Intel processors, previously confidently overclocked to 5 GHz, in the new boards could not overcome the boundary at 4.6 GHz.  The radiators of the VRM elements warmed up to 84 degrees Celsius, and the board under them heated to a temperature of over 105 degrees. Overheating was detected in all tested boards with a LGA 2066 connector, which included Gigabyte AORUS X299 Gaming 3 and ASUS Prime X299-A.  Another unpleasant moment was a strong warm-up to 65 degrees - power cables connected via a single 8-pin connector.  Without a second connector that separates the load, the thermal insulation of the cable insulation is possible.  However, the manufacturer's representative commented on this statement by the fact that the problem can be with a specific performance of the cable and connector (used SuperFlower BP with "crystal" connectors). If developers give the motherboard time, Der8auer sums it up , decent motherboards with modified power systems will appear on the market, in which Intel processors will be able to conquer new performance heights. Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 49116 Rating: 10.0/10 (6 votes cast) Prepared for sale boards on Intel X299 are not suitable for overclocking Skylake-X	Add Comment ( 1 ) PREPARED FOR SALE BOARDS ON INTEL X299 ARE NOT SUITABLE FOR OVERCLOCKING SKYLAKE-X

POSTER: computer news   ||    FIRST LOOK AT THE NEW NOKIA BUTTON PHONE	DATE:2017-06-29
HMD company , which introduced the legendary Nokia 3310 in a new guise at the beginning of the year, is preparing to release another mobile phone under the Nokia brand.  Thanks to the Chinese certification telecommunications center TENAA, we already know what it will look like. According to the portal GizmoChina , the new Nokia mobile phone with the model number TA-1017 is certified in the Celestial Empire.  It is clad in a plastic case, on the back of which there is a main camera without a flash and a speaker, and on the front - a small display and a keyboard.  Its technical characteristics are not indicated on the TENAA website.  It is known only that he, like the new Nokia 3310, will not get 3G support. The release date and the cost of Nokia TA-1017 are not yet known to us, however, like its official name.  It is not excluded that it will be presented in the third quarter of 2017 together with other Nokia devices, including the flagship smartphone Nokia 9 with 5.3-inch QHD-display and 6 or 8 GB of RAM. Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 49115 Rating: 10.0/10 (7 votes cast) First look at the new Nokia button phone	Add Comment ( 1 ) FIRST LOOK AT THE NEW NOKIA BUTTON PHONE

	xtreview is your : Video card - cpu - memory - Hard drive - power supply unit source

computer news computer parts review OLD Forum Downloads New Forum Login Join Articles terms Hardware blog Sitemap myspace proxy Get Freebies