- X2 Rindja designed to build productive systems - extreme modifications Guide for GeForce GTX 1080 Founders Edition - TSMC aims to start the first 7-nm production and become "the new Intel" TSMC aims to start the first 7-nm production and become the new Intel - Boards with socket AM4 still require new Fastening for coolers -

	xtreview is your : Video card - cpu - memory - Hard drive - power supply unit source

POSTER: computer news   ||   X2 RINDJA DESIGNED TO BUILD PRODUCTIVE SYSTEMS	DATE:2016-05-27
The Dutch company X2 unveiled a new computer case Rindja.  Made in the form factor Midi Tower, it is able to offer an attractive appearance and a very high capacity that allows you to collect inside the most productive system. X2 Rindja case made of 0.55 mm steel, and has dimensions of 510 x 240 x 480 mm and weighs 4.6 kg.  Inside the novelty is divided into two compartments, one is designed to accommodate the power supply and three 3.5-inch and three 2.5-inch drives, and the other - for all other system components, including the motherboard ATX size and the Micro ATX, as well as cards a length of 370 mm.  The maximum height of the CPU cooling system is not specified, but according to our calculations, it should be about 200 mm.  The number of expansion slots is seven. On the perforated front panel X2 Rindja pre-installed two 120-mm fan with light from 15 LEDs each.  The front panel can be placed another 120-mm fan, two more fan can be accommodated on the top panel, one - on the back, and three - on the shell covering the power supply and drives.  Also, the body is able to take the radiator liquid cooling systems up to size 360 mm.  Note that the air vents are equipped with dust filters that are easily removed for cleaning. X2 Rindja in the coming days will be available at an estimated price of US $ 80. Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 44340 Rating: 10.0/10 (6 votes cast) X2 Rindja designed to build productive systems	Add Comment ( 1 ) X2 RINDJA DESIGNED TO BUILD PRODUCTIVE SYSTEMS

POSTER: computer news   ||   EXTREME MODIFICATIONS GUIDE FOR GEFORCE GTX 1080 FOUNDERS EDITION	DATE:2016-05-27
Working in EVGA Taiwan Ukrainian engineer Ilya Tsemenko alias TiN published a detailed step by step guide to the hardware modifications of the standard version GeForce GTX 1080 known as the Founders Edition.  The purpose of these modifications involve working with a soldering iron and a deep knowledge of the basics of electronics - to prepare the graphics system power to increase voltage while overclocking using liquid nitrogen.  The first stage of modification involves the installation of additional elements. Author methodological guidance explains that even with the use of liquid nitrogen relatively safe voltage range on the GPU - is 1.3-1.5 V, although described modification will allow to overcome the barrier 1.6 V. The second good news is that water blocks and tanks of liquid nitrogen required for overclocking GeForce GTX 1080 compatible mount with products released for GeForce GTX 680/780/980 (Ti).  Along the perimeter of the graphics processor is no longer a metal edge that prevented the crystal against mechanical damage during installation of the cooling system.  For this reason, the final installation should be carried out with extreme caution.   Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 44339 Rating: 10.0/10 (7 votes cast) extreme modifications Guide for GeForce GTX 1080 Founders Edition	Add Comment ( 1 ) EXTREME MODIFICATIONS GUIDE FOR GEFORCE GTX 1080 FOUNDERS EDITION

POSTER: computer news   ||    TSMC AIMS TO START THE FIRST 7-NM PRODUCTION AND BECOME "THE NEW INTEL" TSMC AIMS TO START THE FIRST 7-NM PRODUCTION AND BECOME THE NEW INTEL	DATE:2016-05-27
For MANY years  Taiwanese Company TSMC's was lagging behind Intel on the Technological a production especially in terms of entry Into a production of new Technological standards. But the time the when Taiwan is ready to Become a technology leader, is getting closer .  At the end of  this year's, as with Already known, TSMC's mass- start the  production Semiconductors with the Norms of 10 nm.  Intel Company  enterprise will  take this step only in the: second the half of the next year's, behind  TSMC's a three or a four Quarters. The next barrier - mass production with 7 nm - will   BE taken by TSMC's in the first the quarter of 2018.  TSMC's SURPASS Also  Samsung, which plan to start qualification Plans 7-nm process technology in the  second half:  in next year's - after a three Quarters of TSMC's. TSMC's Company  enterprise will do IT AT the end of the this year's or the first the quarter of 2017. THUS, TSMC's will of the BE the first time in the history  the technology leader  in the industry for the the production of semiconductors. At the next conference, the reporting TSMC 's CEO, Mark Liu , said that the rate of failure in the manufacture of advanced 7-nm 128 Mbit  SRAM array-is 60-70%. To the complete  development and to the move Within the company for the first time over the years significantly increases the annual budget for development - to $ 2.2 billion Workforce engineers will also grow :. from 5123 people to 5690 people. On 7-nm process, according to the company , already has 20 the customers. According to company management, the development of 7 nm process technology-will allow TSMC's challenge Intel  - is the release of processors for the server market. Today, Intel in the server market Holds 98- 99%. TSMC's collaboration with ARM and Numerous clients   Gives a chance to the create such wonderful alternative server platforms, IT CAN Defeat Intel lead . TSMC's Company Understand that IT only Produces what others are Developing. The Process technology Gives a lot, But not everything. Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 44338 Rating: 10.0/10 (5 votes cast) TSMC aims to start the first 7-nm production and become "the new Intel" TSMC aims to start the first 7-nm production and become the new Intel	Add Comment ( 1 ) TSMC AIMS TO START THE FIRST 7-NM PRODUCTION AND BECOME "THE NEW INTEL" TSMC AIMS TO START THE FIRST 7-NM PRODUCTION AND BECOME THE NEW INTEL

POSTER: computer news   ||   BOARDS WITH SOCKET AM4 STILL REQUIRE NEW FASTENING FOR COOLERS	DATE:2016-05-27
AMD promise to Introduce in the current year's, the processors in the performance of  Socket AM4. Italian colleagues have disappointed MANY Potential buyers, Informing about the need to use new Fastening system for the installation of cooling Systems on motherboards equipped with the socket the Socket AM4. At the exhibition  Computex 2016 AMD can allow partners to share new details about Socket AM4 platform on this event. Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 44337 Rating: 10.0/10 (6 votes cast) Boards with socket AM4 still require new Fastening for coolers	Add Comment ( 1 ) BOARDS WITH SOCKET AM4 STILL REQUIRE NEW FASTENING FOR COOLERS

	xtreview is your : Video card - cpu - memory - Hard drive - power supply unit source

computer news computer parts review OLD Forum Downloads New Forum Login Join Articles terms Hardware blog Sitemap myspace proxy Get Freebies