- Gionee S10 Plus with two dual cameras certified in China - For remote services, Intel announced two line of SSDs on 3D NAND memory - Sample AMD Vega revealed its level of performance in 3DMark Fire Strike - Open BenchTable open stands now offer support for installation on the side -

	xtreview is your : Video card - cpu - memory - Hard drive - power supply unit source

POSTER: computer news   ||   GIONEE S10 PLUS WITH TWO DUAL CAMERAS CERTIFIED IN CHINA	DATE:2017-05-09
Gionee is preparing to release a new smartphone called S10 Plus with two dual cameras.  The novelty is already certified in China, which means that its announcement is just around the corner. As it became known to our colleagues from GizmoChina , the new smartphone Gionee S10 Plus passed certification in the Chinese telecommunications center TENAA.  It has a 5.5-inch display with a resolution of 1920x1080 pixels (Full HD) and is based on an eight-core processor with a clock speed of 2.5 GHz.  The amount of RAM is 4 GB, and the capacity of the built-in storage is 64 GB. Gionee S10 Plus will receive a total of four cameras.  Two of them with a resolution of 16 and 8 megapixels will be located on the back side, and two others with a resolution of 20 and 8 megapixels - on the front.  The main camera will be supplemented with an LED flash. Also, the new Gionee smartphone will be equipped with a slot for microSD memory cards (maximum 128 GB) and a built-in Home button fingerprint scanner.  Autonomous work will be provided by a rechargeable battery with a capacity of 3450 mAh.  And the smartphone will be delivered with the operating system Android 7.0 Nougat on board. The Gionee S10 Plus will be housed in an all-metal case.  Its dimensions are 155x76.8x7.355 mm with a weight of 178 g. It will come in two colors: gold and black. Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 48598 Rating: 10.0/10 (4 votes cast) Gionee S10 Plus with two dual cameras certified in China	Add Comment ( 1 ) GIONEE S10 PLUS WITH TWO DUAL CAMERAS CERTIFIED IN CHINA

POSTER: computer news   ||    FOR REMOTE SERVICES, INTEL ANNOUNCED TWO LINE OF SSDS ON 3D NAND MEMORY	DATE:2017-05-07
In 2010, Intel launched its first factory in China to produce semiconductors on plates 300 mm in diameter.  This factory Fab 68 near the city of Dalian.  Until 2015, this enterprise mainly produced chipset.  In 2015, Intel decided to redesign the factory for the release of 3D NAND memory.  Having invested in the modernization of Fab $ 68.55 billion for two years, Intel in early 2017 began the production of 3D NAND TLC chips at the plant.  Today, based on these chips, Intel introduces two new lines of server SSDs: DC P4500 and DC P4600. The ruler DC P4500 is designed for reading load.  The DC P4600 drives are designed for mixed load and, in particular, for intensive rewriting.  Both series are represented as models in the PCIe expansion card form factor, and in the 2.5-inch form factor U.2. The model range of the DC P4500 is represented by 1, 2 and 4 TB capacities.  The steady reading speeds reach 3290 MB / s, and the established recording speed is 1860 MB / s.  The value of IOPS for reading random blocks can rise to 687 thousand, and in the recording mode of random 4-Kbyte blocks reaches 62 thousand. Consumption in the active mode approaches 18.61 W.  The resource for overwriting the most capacious models is declared at 4,600 TB. The lineup of the DC P4600 series contains 1.6, 2 and 3.2 TB drives (U2 form factor) and models in the HHHL form factor with capacities of 2 and 4 TB.  The steady reading speed rises to 3290 MB / s, and the established write speed is up to 2100 MB / s.  Values in IOPS for reading random blocks reach 694 thousand, and for recording - 228 thousand. Consumption of models DC P4600 is higher than consumption of models DC P4500 and approaches to a mark of 20.71 W.  The resource for overwriting the models is quite high and reaches 21,690 Tbytes. Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 48597 Rating: 10.0/10 (13 votes cast) For remote services, Intel announced two line of SSDs on 3D NAND memory	Add Comment ( 1 ) FOR REMOTE SERVICES, INTEL ANNOUNCED TWO LINE OF SSDS ON 3D NAND MEMORY

POSTER: computer news   ||    SAMPLE AMD VEGA REVEALED ITS LEVEL OF PERFORMANCE IN 3DMARK FIRE STRIKE	DATE:2017-05-07
Since the sample of the AMD Radeon RX Vega card with the index 687F: C1 already "legacy" in 3DMark Time Spy , colleagues from the WCCFTech site had no difficulty in finding a mention of testing this video card in 3DMark Fire Strike.  We even managed to find a direct link to this result The same sample AMD Vega is equipped with 8 GB of memory, runs at 1200/700 MHz, and in this case is combined with the AMD Ryzen 7 1800X processor running at 3.6 GHz. Colleagues come to the conclusion that serial copies of Radeon RX Vega will work at higher frequencies - at least, if we talk about the characteristics of the GPU itself.  In this case, they will be able to compete in 3DMark Fire Strike in terms of performance with the GeForce GTX 1080, at least. Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 48596 Rating: 10.0/10 (13 votes cast) Sample AMD Vega revealed its level of performance in 3DMark Fire Strike	Add Comment ( 1 ) SAMPLE AMD VEGA REVEALED ITS LEVEL OF PERFORMANCE IN 3DMARK FIRE STRIKE

POSTER: computer news   ||    OPEN BENCHTABLE OPEN STANDS NOW OFFER SUPPORT FOR INSTALLATION ON THE SIDE	DATE:2017-05-07
Portable stand for open placement of PC components within the Open BenchTable project was developed taking into account the wishes of the public, and now enthusiasts independently create various accessories for this stand, which can be manufactured using the method of three-dimensional printing from polymer materials.  The newest replenishment of the library of objects is special supports that allow putting the stand on its side without damaging the structural stability and risk of damaging the supporting surface with the edge of the counter. As reported by the developers, many enthusiasts put their booths on their side to hold a photo shoot, and with new supports the system will be easier to maintain balance.  In addition, they protect the bearing surface from contact with a massive aluminum slab, which is the largest part of the stand. Those who wish can download the files necessary to make these supports on a 3D printing device.   Select Rating : Currently 10.00/10 1 2 3 4 5 6 7 8 9 10 48595 Rating: 10.0/10 (13 votes cast) Open BenchTable open stands now offer support for installation on the side	Add Comment ( 1 ) OPEN BENCHTABLE OPEN STANDS NOW OFFER SUPPORT FOR INSTALLATION ON THE SIDE

	xtreview is your : Video card - cpu - memory - Hard drive - power supply unit source

computer news computer parts review OLD Forum Downloads New Forum Login Join Articles terms Hardware blog Sitemap myspace proxy Get Freebies