HI There ;
Do you find this message annoying?
Why not make a post and get rid of it ?
|
turboherb
|
 |
« on: April 18, 2010, 01:13:34 pm » |
|
hi i'm new to this forum.I would like some help overclocking my cpu, I have a p5n em hdmi board witha e5200 cpu and running 4gig of ram on a windows 7 o/s ,I would like to get 3.0 or a little more out of it safely. any help would be appreciated. thanks in advance  |
|
|
|
|
Logged
|
|
|
|
|
Xtreview
|
|
« Reply #1 on: April 18, 2010, 01:22:36 pm » |
|
increase your FSB slowly 10 mhz step and check for stability each time , your CPU could do 3Ghz with some additional voltage and proper cooling , so start tweaking your FSB and voltage and watch your temp
|
|
|
|
|
Logged
|
Intel Core i7 @ 4 GHZ :-)
Intel Core2 E8600 @ 6 GHZ
Intel Quad core @ 4200 Mhz ,
Intel Core 2 Duo @ 4700 Mhz,
Athlon X2 @ 3200 MHz .....
2x8800 ULTRA @ Vmod :-) .
4GB memory @ 1200 MHZ
2GB DDR3 @ 1600 MHz (Under test)....
2*2900 XT No crossfire
2xHD 4870 X2
2xGTX 280
Geforce 4 MX.......
|
|
|
|
turboherb
|
|
« Reply #2 on: April 18, 2010, 07:38:55 pm » |
|
thanks for the quick reply,ok the stock setting on the fsb was 800,I bumped it up to 810 then 820 , with no change, should I go higher also which voltage settings were you talking about.please bare with me i'm new at this stuff but very interested. thnks
|
|
|
|
|
Logged
|
|
|
|
|
Xtreview
|
|
« Reply #3 on: April 19, 2010, 05:56:09 am » |
|
download cpuz to check your cpu speed , FSB should be 200
your cpu freq is 200x12.5 = 2500 mhz
so for 210x12.5 you will get 2625 mhz and so on
additional cpu voltage is required only in case of CPU instability , to check for stability use intel burn in test for 10-15 min if stable add more FSB and so on
|
|
|
|
|
Logged
|
Intel Core i7 @ 4 GHZ :-)
Intel Core2 E8600 @ 6 GHZ
Intel Quad core @ 4200 Mhz ,
Intel Core 2 Duo @ 4700 Mhz,
Athlon X2 @ 3200 MHz .....
2x8800 ULTRA @ Vmod :-) .
4GB memory @ 1200 MHZ
2GB DDR3 @ 1600 MHz (Under test)....
2*2900 XT No crossfire
2xHD 4870 X2
2xGTX 280
Geforce 4 MX.......
|
|
|
|
turboherb
|
|
« Reply #4 on: April 19, 2010, 06:53:11 pm » |
|
hi guys I hate to be a noobe pain,in advanced bios it says FSB QTR is 800, i don't see anything that is even near 200 mhz.
|
|
|
|
|
Logged
|
|
|
|
|
Xtreview
|
|
« Reply #5 on: April 19, 2010, 06:59:24 pm » |
|
U have somethings like this :  ? if yes choose manual |
|
|
|
|
Logged
|
Intel Core i7 @ 4 GHZ :-)
Intel Core2 E8600 @ 6 GHZ
Intel Quad core @ 4200 Mhz ,
Intel Core 2 Duo @ 4700 Mhz,
Athlon X2 @ 3200 MHz .....
2x8800 ULTRA @ Vmod :-) .
4GB memory @ 1200 MHZ
2GB DDR3 @ 1600 MHz (Under test)....
2*2900 XT No crossfire
2xHD 4870 X2
2xGTX 280
Geforce 4 MX.......
|
|
|
|
turboherb
|
|
« Reply #6 on: April 20, 2010, 08:27:58 pm » |
|
I have nothing like that at all ,maybe its not possible to clock my cpu or maybe i have to upgrade the bios
|
|
|
|
|
Logged
|
|
|
|
|
Xtreview
|
|
« Reply #7 on: April 21, 2010, 04:03:25 am » |
|
could u please give the exact motherboard model , usually it is in the box or just under or above the pic-e slot , some time also near ram slot
|
|
|
|
|
Logged
|
Intel Core i7 @ 4 GHZ :-)
Intel Core2 E8600 @ 6 GHZ
Intel Quad core @ 4200 Mhz ,
Intel Core 2 Duo @ 4700 Mhz,
Athlon X2 @ 3200 MHz .....
2x8800 ULTRA @ Vmod :-) .
4GB memory @ 1200 MHZ
2GB DDR3 @ 1600 MHz (Under test)....
2*2900 XT No crossfire
2xHD 4870 X2
2xGTX 280
Geforce 4 MX.......
|
|
|
|
turboherb
|
|
« Reply #8 on: April 21, 2010, 04:21:43 am » |
|
hey this is a good forum,thanks my mobo is a ASUS P5N-EM HDMI REV1.06G.there just seems to be no way to get at the settings has a smalar board and he has the settings in advanced bios.  |
|
|
|
|
Logged
|
|
|
|
|
Xtreview
|
|
« Reply #9 on: May 03, 2010, 02:45:34 pm » |
|
hello
i am not familiar with this model , could u take a photo of all bios page and post it here , without them i can't help
|
|
|
|
|
Logged
|
Intel Core i7 @ 4 GHZ :-)
Intel Core2 E8600 @ 6 GHZ
Intel Quad core @ 4200 Mhz ,
Intel Core 2 Duo @ 4700 Mhz,
Athlon X2 @ 3200 MHz .....
2x8800 ULTRA @ Vmod :-) .
4GB memory @ 1200 MHZ
2GB DDR3 @ 1600 MHz (Under test)....
2*2900 XT No crossfire
2xHD 4870 X2
2xGTX 280
Geforce 4 MX.......
|
|
|
|
You are viewing this forum as Guest , register and get access to all its feature , This is Free :-)
