The output of new video card NVIDIA's current generation is also accompanied by a bunch of flaws. For example , in late May, it became known about the malfunction of fan cooling adapters in GeForce GTX 1080 Founders Edition. Updating drivers will fix this problem, or reduced the frequency of its manifestations. Now there is a new problem - incorrect loading Windows on monitors with a high frame rate.
According to the forum GeForce Forums, a number of owners of the GeForce GTX 1080 and 1070 GTX reference design not faced an inability to load Windows on the monitor connects over dual-link DVI, and with frame rates above 81 Hz with a resolution of 1440p (and higher). Frame rate 81 Hz corresponds to 330 MHz clock signal (pixel clocks or dot clocks) for dot-matrix displays. When installing the frame rate of more than 81 Hz and a resolution of 2560 x 1440 pixels instead of the Windows boot image on the screen there is some multi-colored mess. The resolution is reduced automatically, but Windows can not load. To boot properly, it is necessary to reset the settings to those that were default.
In other words, work in Windows with high resolution and high frame rate can be smoothly until the system is rebooted. Then it is necessary to reset the settings, load Windows and then set the desired parameters, and before turning off the PC, it is desirable to change all the settings back to the ones that were the default, otherwise go to the desktop just will not work. Again, adjust to higher resolution until the next reboot.