Scythe company improved its ninja cooler step by step, moreover two first update did not bring a radical change : first the Ninja cooler got the suffix plus, and then the B revision. Changes touched the fan characteristics , which began to pump through more air with smaller noise level , and also compatibility with some processor . Released in limited quantity Scythe ninja copper demonstrated more serious approach : A wider arrangement of thermal tubes allowed to increase the uniformity of heat distribution and to facilitate the passage of air through the radiator. Later Appeared the copper plates witch changed the relative position of thermal tubes, however, as showed tests, this favorably affected the cooler performance .
Work on the improvement of ninja cooler construction did not cease, and recently scythe company presented the product ninja 2 (SCNJ-2000). First the copper radiator has a wider arranged thermal tubes, which as before six. The standard size fan 120 X 120 X 25 mm can be placed in any of four sides . The fan work at 1000 RP/min, in this case pumping through 52,9 cubic feet air per minute or 89,87 cubic meters in hour , the noise level does not exceed 20,5 DB. The radiator dimensions grew: from 110 X 110 X 150 mm to 116 X 116 X 152 mm. the radiator mass was increased from 640 to 705 Gram. Producer asserts that Ninja 2 is up to 2-5% is more effective than predecessor in the passive operating mode, and up to 15% more effective in the active mode . In the first case it can cool processor with TDP level not more than 65 W, the second - with the TDP level not more than 130 W. This cooler ensures compatibility with socket 478, LGA 775, Socket 754/939/940/AM2. Recommended by producer retail price for scythe ninja 2 is equal to $48 without Tax. Related Products :
|