intel conroe voltage pin mod

	xtreview is your : Video card - cpu - memory - Hard drive - power supply unit source

Recommended : Free unlimited image hosting with image editor

POSTER: pc hardware news   ||   INTEL CONROE VOLTAGE PIN MOD	DATE:2006-08-21
Our permanent readers already  remember that  LGA 775 processors give possibility to raise the  bus frequency  to 1066 MHz by closing some contacts on the  processor - the so called BSEL mod. such modifications  was interssing for many Conroe processors  owners  ,especially when they encountered the limited overclocking possibilities in current motherboards. Associates solved this question by the increase of vcore for Conroe cpu by closing some contact areas. It is noted that there are varieties of Conroe with the different values of nominal vcore. Associates examined the vcore modification  with  nominal value of  1.325 v and 1.2875 v. The absence of pins on the   processor will make the modification  simpler: there is no need for wire loops, it is sufficient to be armed with an insulating tape and current-conducting pen. So this  would be enough to connect a pairs of contacts in processor, necessarily to be risk free to use the  insulating tape, and then applie the current-conducting varnish. Some modifications imply to not only to connection of contacts, but also the isolation of single contacts. For this small piece using the insulating tape was sufficient  (red point in the photograph). here is how to get the the conroe pin volt mod 1.4 v. using insulting tape applaying conductive paste here is the conroe pin volt mod 1.45 v the 1.5 v volt mod the 1.55 v volt mod the 1.6 v volt mod this mod is pretty easy and usfull for those motherboard witch don't allow vcore adjustment .remenber that u are dowing this mod at your own risk and such Voltage Modifications would void your warranty ... Related Products :

	xtreview is your : Video card - cpu - memory - Hard drive - power supply unit source

Xtreview Support N-Post:xxxx Xtreview Support	INTEL CONROE VOLTAGE PIN MOD
	Please Feel Free to write any Comment; Thanks

XT Future Member N-Post:	INTEL CONROE VOLTAGE PIN MOD
	Thanks, I used the 1.55V mod (tried the 1.45 but I must not have blocked that one spot well enough) on my 420 Celeron. I used a touch of glue between the lands and then used aluminum foil to bridge the gaps.

Related news:

AsRock conRoe865PE 45nm support added (2008-05-19)
MSI 945GCM5 V2 : Cheap conroe motherboard with 1333 Mhz support (2007-07-26)
Conroe G0 stepping overclocking (2007-05-28)
ASRock ConRoe1333-D667,GLAN,eSATA2 (2007-05-13)
New Conroe FSB world record (2007-05-01)
Conroe- L celeron extreme overclocking (2007-04-29)
Conroe-l stepping A0 (2007-04-14)
Conroe- L and Merom- L new stepping A (2007-04-09)
ASRock conRoe1333-DVI-H HDCP (2007-03-02)
Conroe E0 overclocking (2007-02-20)
celeron 420 Conroe- L (2007-02-13)
Intel conroe x6800 extreme overclocking (2007-02-12)
conroe BSEL mod 1333mhz (2007-02-06)
conroe shilled air overclock (2006-12-24)
intel conroe price drop (2006-12-19)
conroe stepping L2 (2006-12-16)
Celeron 4xx core Conroe-L (2006-11-18)
conroe l benchmark (2006-11-16)
e4300 conroe launch date (2006-11-13)
intel conroe e4300 (2006-11-12)

Post Quick Reply:

                                        
Verif code:

                 

computer news computer parts review Old Forum Downloads New Forum Login Join Articles terms Hardware blog Sitemap Get Freebies