KingSpec widely produces SSD-storage interface PATA (IDE), which are demanded in the industrial equipment, where the use of conventional solutions magnetic plates (HDD) is limited, for example, due to the presence of strong vibrations, and where the total cost upgrade impractical (expensive) or simply impossible.
KingSpec presented quite familiar SSD form factor 2.5 "Interface SATA3.
The base of KingSpec Jinsheng Wei SSD lay controller Marvell 88SS9187 and 19-nm MLC ToggleNAND second generation (A19) production Toshiba, which makes them very similar to the infamous Plextor M6 Pro, which we recently tested .
However, the characteristics of KingSpec decision still slightly inferior to Plextor proposal : as part of the family is also present four versions, read and write speeds reach 520 and 480 MB / s, respectively (compared to 545 and 490 MB / s), the number of achievable IOPS on operations with blocks of 4 Kbytes of 94000 to 80000 on the reading and writing (at Plextor M6 Pro - 100000/88000). Related Products :
|