Arctic company (in the past - Arctic Cooling) introduced two new CPU Cooler: Freezer i32 for systems based on processors LGA 1155/1156/1150/1151 / 2011-3 and Freezer A32 for processor-based systems in the performance of Socket AM2 / FM1 / AM3 / AM3 + / FM2 / FM2 +, which are characterized by fans controller , allowing them to stop completely with little computational load. The manufacturer specifies a range of speeds as follows: 0 - 1350 r / min. The noise level at maximum speed does not exceed 30 dBA.
The specifics of the fan depend on the specific processor model. Arctic states that the cooler is able to remove up to 200 watts of heat, but recommends using processors that generate less than 150 watts of heating power.
Both cooler have the same structure, except for the mount system. From the base depart four U-shaped heat pipe technology "direct contact" with a diameter of 6 mm. They permeate the 49 aluminum cooling fins, which are the side surfaces form a blank wall. Overall dimensions of the radiator - 70 x 123 x 150 mm, they do not interfere with installing memory modules, even in the presence of the two fans on the CPU coolers. Replacement Kit mounts to the second fan is attached directly.
The basic version of the chillers are equipped with fans with improved sleeve bearings, but for lovers of increased resources is proposed Cooler Freezer i32 CO (Continuous Operation), whose fan is equipped with a double ball bearing. If Freezer i32 and Freezer A32 are estimated at $ 50, the version of the Freezer i32 CO is now $ 60. Related Products :
|