During our days the interfaces continuously raise their capacity, even if in this there is no objective requirement. Serial ATA, PCI express, USB, HyperTransport - here is only the part of those interfaces, which accelerated themselves or they be going to make this soon . It cannot be forgotten and communication interfaces, is most those being progressively developing of them should be recognized Wi-Fi and other wireless standards data transmission .
As communicates associate, called by the representatives of institute IEEE interrogatory group three quarters of voices she selected by 100 Gbit/s as the following standard speed of data transmission on the interface ethernet. This is ten times more rapid than the most rapid until today standard ethernet - 10 Gbit/s.
The interface Of ethernet was represented more than 30 years ago, its popularity reached as the standard for the data transmission in the corporate networks with a speed of 10 Mbit/s. The rapid development of network technology made possible to sufficiently rapidly incorporate the almost general utilization Of ethernet 100 Mbit/s, and then Ethernet 1 Gbit/s. Strictly speaking, now already there is a equipment, which makes possible to work at the speed of 10 Gbit/s. Users rapidly became accustomed to the high speed, and transmitted data easily mastered the excess of capacity.
In the opinion of experts, to 2009-2010 for the work on the interface ethernet universally recognized speed they will become 100 Gbit/s. The first time for the data transmission with similar will be speed used a special lines. To the developers of the equipment they will calculate in more complex detail the requirements on the basis of energy consumption and temperature; however, all problems, in the final analysis, will be solved. In future ethernet will reach higher speed, in this the specialists are assured.